|
Please
follow below instructions for the PSA12 APLUS upgrade.
Step 1. Download Below Files
Download Link For Navitech Firmware Upgrade Kit
https://www.dropbox.com/s/nv15n5270cqbmnz/Navitech
Firmware upgrade tool.zip?dl=0
Download
Link for PSA12 APLUS Firmware
https://www.dropbox.com/s/e3fouo6htwiykio/PSA12%2020170420.zip?dl=0
Download
and unzip the file.
Step 2. Remove all connectors from the video interface for update process
and
prepare the mini usb to usb connector for connecting the video interface to
the PC.
You do not need any additional power source to the interface for the
update except mini usb connection to the pc.
-Firmware Upgrade Tool Installation to the Windows PC-
1.
Unzip Navitech Firmware Upgrade Tool
2.
Open Win7 Folder
3.
Install One Driver According to your PC System (right click MY PC ->
Properties -> System Check 64bit or 84bit)
-dpinst_amd64
= 64bit
-dpinst_x86
= 86bit
-Begin Firmware Upgrade Procedure-
You have to upgrade 2 different devices (MAIN BOARD UNIT and
CAN MODULE which is located between the main harness and can harness)
- First Main Board Unit Upgrade -
1.
Run "navitech_update_tool".
2.
Check "Insert" box on the bottom of the program.
3.
Add all the bin files previously unzipped from PSA12 APLUS Firmware (Except
NV1_ST_08010000_PSA12_CAN_BOARD file.
5.
Check "Auto update" on the bottom of the program.
6.
Connect Interface (Module) to PC by mini usb to usb connector.
7.
Interface will automatically be detected from the PC and proceed update.
8.
Disconnect when the update process is ended (No red led blinking)
| 
